Servicing, repair, calibration and rotor inspection for laboratory Incubators

Incubators

Incubators maintain precise, stable conditions, temperature, CO2, humidity and sometimes oxygen levels, that cell cultures and biological samples depend on. Even a small drift in any of these parameters can compromise a culture or invalidate results, often without any obvious sign until it’s too late  Whatever type of incubator you run, we can support you with routine servicing or a specific fault and breakdown.

Cooled & Refridgerated Incubators

Incubators capable of maintaining temperatures below ambient, used where samples need cooler, controlled conditions.

General Purpose Incubators

Standard dry incubators used for routine sample and culture incubation at a fixed temperature.

CO2 Incubators

CO2 Incubators maintain the required CO2 levels and temperate for culture incubation.

Common Incubator Issues

If your incubator is showing any of these signs, or something else altogether, get in touch with the details and we’ll advise.

  • Temperature drift — Gradual loss of accuracy that can go unnoticed without regular calibration checks.
  • CO2 or gas control problems — Faulty sensors or supply issues affecting the incubator’s ability to maintain the correct gas concentration.
  • Humidity control issues — Can affect culture conditions and contribute to condensation inside the chamber.
  • Door seal and gasket wear — A common cause of temperature and gas leakage, and a route for contamination.
  • Contamination risk — Can build up over time without proper cleaning and maintenance of the chamber and components.
  • Sensor and control system faults — Ageing sensors or control boards can cause inconsistent readings or erratic behaviour.
a person in a white coat and blue gloves

We're here to help

A simple Process

1

Tell us about your Incubator

Submit the manufacturer, model and a description of the issue or service you need via our quote form. If you’re not sure exactly what’s needed, send us what you know and we’ll advise.

2

We assess and Quote

We review your enquiry, request any further information if needed, and provide a quotation based on your equipment and requirements.

3

We come and fix your Incubator

Our engineers complete the servicing, repair, calibration or inspection, keeping you informed throughout and providing documentation for your records.

How often should an incubator be calibrated?

This depends on the equipment, how it's used and how critial the cultures or samples inside it are. Many labs calibrate incubators as part of a routine servicing schedule. We can advise on a suitable interval for your equipment.

My incubator is showing temperature flucuations, what could be causing this?

This could be a sensor fault, a control system issue, or simply a unit due for calibration. Send us the make and model and what you're noticing via our get a quote form and we'll advise on any likely causes.

Does servicing include checking the door seal?

Door seals and gaskets are a common source of temperature and gas leakage, so they're typically checked as part of a service visit.

Can I get a calibration certificate for my incubator?

Yes, calibration work is documented, giving you a record for your own equipment files, audits or quality checks.

© 2026 Movely. All Rights Reserved.